Quick Wash; Delayed Start - hanseatic HGVI6082D14J7713GS Gebrauchsanleitung

Quick wash

This option allows you to accelerate the
cleaning programme.
This option is not available with the pro-
grammes , and
• To
– activate the option, press the
The reduced cycle time is shown in the
display(4).
– deactivate the option, press the button
again. The cycle time is shown in the
display (4).
Activate/deactivate automatic
door opening
The "Automatic door opening" function is ac-
tivated as standard.
• In order to
– deactivate the "Automatic door opening"
function, press and hold the
(7) buttons simultaneously until the
indicator (8) goes out. The appliance
door remains locked when the pro-
gramme has reached the drying phase.
– activate the "Automatic door opening"
function, press both buttons again and
hold in until the
in the display.
.
(7) button.
(8)
(6)
(7)
(6) and
indicator (8) appears
Dishwasher operation

Delayed start

The washing cycle will normally begin as
soon as the appliance door has been closed.
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the button (6) as many times as
necessary for the display (4) to show the
delay required ( ,
H: 0 0
Starting the dishwashing
programme
1. Close the dishwasher door.
If you
– have not set up a start delay,
the programme cycle will begin after a
few seconds.
– have set a delayed start, the duration of
the delay remains visible on the display;
the dots between
also flash. After the start delay runs out,
the programme will start.
During the programme cycle the display
shows the remaining time; the dots be-
tween the hour and minute digits flash.
At the end of the programme cycle,
an acoustic signal will sound 8 times and
the display will show
End
2. Turn the tap off.
3. Wait a little while before unloading the
dishwasher.
Page EN-23
to ).
H: 0 1 H: 2 4
and the hour digit
H
.