Additional Safety Instructions; Residual Risks - Parkside PGSA 4 A2 Originalbetriebsanleitung

GB IE
4) ADDITIONAL SAFETY INST-
RUCTIONS
a) Only switch on the tool
when hands, feet and all
other body parts are at
a secure distance to the
tool. Risk of injury from cuts.
b) Take care that you do not
injure your hands and feet
with the cutting elements.
c) Remove the power supply
unit before working with
the equipment. Do not use
extension cables. The po-
wer supply unit is to be
used only in enclosed spa-
ces. Water entry increases the
risk of electric shock.
d) Do not use the shrub cut-
ter in combination with
the telescopic shaft. There is
a risk of cut wounds.
e) The tool is designed to trim
hedges. Do not use the
tool to cut branches, hard
wood or other. To avoid da-
maging the equipment.
f) Do not attempt to dislodge
a blocked/trapped blade
before switching the tool
off. There is a risk of injury.
g) Never hold or pick up the
device by the cutting bla-
de. Contact with the cutting
blade can lead to injuries.
12

5) RESIDUAL RISKS

Even if properly operating and hand-
ling this electric tool, some residual
risks will remain. Due to its construc-
tion and build, this electric tool may
present the following hazards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Eye damage if suitable eye pro-
tection is not worn.
d) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
Warning! During operation,
this electric tool generates an
electromagnetic fi eld which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk of
serious or lethal injuries, we
recommend that persons with
medical implants consult their
doctor and the manufacturer
of their medical implant befo-
re operating the machine.