Safety Instructions; Symbols - Parkside PGSA 4 A2 Originalbetriebsanleitung

GB IE
Sound pressure level
) ...................63.0 dB(A), K
(L
pA
Sound power level (L
guaranteed ........................... 77 dB(A)
measured .....74.1 dB(A); K
)
Vibration (a
h
at handle ......... 2.41 m/s
Battery (Li-Ion)
Nominal voltage .............. 4 V
The noise and vibration levels have been
calculated according to the norms stated in
the conformity statement.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value de-
pending on the manner in which the power
tool is used.
Try to keep the exposure to vibrations as low
as possible. Examples of measures to reduce
vibration exposure are the wearing of gloves
when using the tool and limiting the working
hours. For this purpose all parts of the oper-
ating cycle have to be considered (for exam-
ple, times when the electric tool is switched
off and times when it is switched on but run-
ning without any load).

Safety Instructions

This unit can cause serious in-
jury if not used correctly. Be-
fore using the unit, carefully
read through the instruction
manual and familiarise your-
self with all of its controls.
6
= 3 dB
pA
)
WA
= 2.47 dB
WA
, K=1.5 m/s
2
; 2 Ah

Symbols

Symbols in the manual
Warning symbols with in-
formation on damage and
2
injury prevention.
There is a risk of injury from
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
Wear anti-slip safety shoes.
Wear cut-resistant gloves.
Wear eye and ear protection.
Symbols on the unit
Before using for the fi rst time, care-
fully read through the user manual.
Attention!
Remember that the cutting equip-
ment will continue to move after
switching the unit off.
Do not use the unit during rain, bad
weather damp surroundings or on
wet grass or hedges.
Danger due to materials blown out
of machine!
Remove persons in the vicinity from
the danger area.