Transport And Warehousing; Packing - Profitec GO Bedienungsanleitung

Follow the steps as indicated below:
1.
Brew group at the beginning.
4.
Remove the thin gasket of the
shower tray.
7.
Clean the groove before inserting
the new group gasket.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or similar.
For this purpose, the steam nozzle may also be unscrewed.
Replace the steam/ hot water nozzle.
8

TRANSPORT AND WAREHOUSING

8.1 Packing

The GO is delivered in a special carton and protected by a plastic cover and foam.
Translation of the original German user manual
2.
Remove the countersunk screw in
the middle of the brewing unit.
5.
Now the group gasket can be
removed.
8.
Insert the new group gasket with
the rounded side facing upwards.
3.
Remove the shower screen and
the shower plate.
6.
Remove the group gasket with a
screwdriver.
9.
Re-insert the gasket and the
shower screen as seen in pict.4
and tighten them with the
countersunk screw.
ENGLISH
32