Reducing The Colour Depth Of The Image Data To Be Transmitted - G&D VisionXS-F-DP-UHR Installation Und Bedienung

Configuration

Reducing the colour depth of the image data to be transmitted

In the default settings, the KVM extender transmits the image information with a
maximum colour depth of 24 bit to the user module.
Using a high resolution and displaying moving images can result in the user module
"skipping" several images.
In such cases, reduce the colour depth of the image data to 18 bits. This way the
data volume to be transmitted can be reduced.
NOTE: Depending on the image contents, reducing the colour depth may result in
slight colour grades.
How to change the colour depth of the image data to be transmitted:
1. Press Ctrl+Num
2. Select the row
3. Under
Color depth
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits (default)
 reduces the colour depth of image data to 18 bits
18 Bit:
4. Press F2 to save your settings.
1. In the menu, click on
2. Click twice on the computer module (
3. Click on the tab
4. Select one of the options given under
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits (default)
 reduces the colour depth of image data to 18 bits
18 Bit:
5. Click on Save
43 · G&D VisionXS-F-DP-UHR
(default) to open the on-screen display.
Target setup and press
press to select on of the following options:
F8
KVM extender
Video channels .
.
Enter .
.
) you want to configure.
CPU
:
Colour depth