Configuration; Overview Of Functions And Default Settings - G&D VisionXS-F-DP-UHR Installation Und Bedienung

Configuration

Configuration
The configuration of the KVM extender can be changed either using the on-screen
display (OSD) or the web application
 The on-screen display is shown on the console monitor. Most configuration settings
can be changed directly on the OSD of the console.
 The web application
and monitor the KVM extender via web browser.

Overview of functions and default settings

The following table provides an overview of the configurable functions of the KVM
extender. It additionally lists the default settings and references to detailed descrip-
tions of the functions.
Function
Changing hotkeys
Changing the OSD key
Opening the on-screen display via double keypress
Changing the exclusive mode aktionkey
Changing the time span of the input lock
Right for exclusive access to the console
Changing the video mode of consoles
Activating a console after the permanent switch-off of the
image display
Active console after starting an extender
Adjusting the operating mode of the RS232 interface
Selecting the EDID mode of the KVM extender
Reducing the colour depth of the image data to be transmitted 24 bit
Freeze mode
Enabling or disabling DDC/CI support
(De)Activating an USB keyboard or the »Generic USB« mode
Changing the scancode set of PS/2 keyboards
Reinitialising USB input devices
Adjusting the waiting period of the screensaver
Selecting a keyboard layout for inputs via OSD
21 · G&D VisionXS-F-DP-UHR
Config Panel
provides a graphical user interface to configure
Config Panel
:
Default setting
Ctrl
Num
deactivated
print key
1 second
granted
image is always on
keyboard/mouse
none
RS232
automatic
deactivated
deactivated
PC multimedia
scancode-set 2
only faulty devices
deactivated
German
Page
27
28
29
30
32
33
35
37
38
39
41
43
44
45
46
48
49
51
52