Main Mix- And Alt 3-4 Controller; Digital Effect Processor And Headphone Socket - MC Crypt MX 1204FX Bedienungsanleitung

6. Connections and Control Elements
9) PHONES/CTRL control
With this control, you set the volume of the connected headphones and the output level at the CONTROL ROOM
outputs.
Turn the PHONES/CTRL R control to the "∞" position before plugging in, unplugging or put-
ting on the headphones or before switching the mixer on or off. There is a risk of damage to
your hearing through excessive volume at the headphones output.

MAIN MIX- and ALT 3-4 Controller

1) MAIN-MIX slider
With the MAIN MIX sliders, you set the left
and right output signal at the MAIN OUTPUT
sockets.
2) ALT 3-4 slider
The ALT 3 and ALT4 slider is used to set the
level for the output signal at the ALT 3 and
ALT 4 output socket.

Digital Effect Processor and Headphone Socket

1) Effect overview table
Overview table of the selectable sound effects (PRESETS).
2) Display
The display shows the currently set sound effect.
3) PROGRAM rotary control
The individual sound effects can be selected using the rotary control.
Turn the rotary control until the number of the desired sound effect
flashes on the display. Briefly press the control. The number no longer
flashes. The desired sound effect is activated.
4) LEVEL display
Use the LEVEL display to visually supervise the input level for the effect processor. The CLIP LED should not
flash. It might cause distortion of the signal. Set the level accordingly with the AUX SEND 2 (FX) control.
41