Network Config - Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung

BNI EIP-508-105-Z067
Network interface
5
Display (continued)
5.9

Network Config

Edit mode
Fig. 5-4: Network Config
► Press the Set button for several seconds to bring up
Edit mode.
► The preferred value is configured by briefly pressing the
arrow button.
► The quick program mode is called up by pressing the
arrow button for several seconds.
► Briefly press the Set button to save the input value and
scroll to the next octet. The 4th octet marks the start of
the editing process.
► The full address entered is saved by briefly pressing the
Set button when editing the first octet. The entered
value appears immediately on the IP overview display.
► Manual changes to IP, subnet or gateway lead to an
automatic change of the IP Setup to static.
22 english
Edit mode Edit mode