Edit Mode; Module Information - Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung

BNI EIP-508-105-Z067
Network interface
5
Display (continued)
5.10

Edit mode

Edit mode
Fig. 5-5: Edit mode
1. In the Network Config menu select IP/subnet or
gateway address.
2. Hold down the Set button to change to Edit mode.
3. Press the arrow button briefly to change the number.
4. Briefly press the Set button to go to the next position.
5. After the last position briefly press the Set button to go
to the next octet of the address or to apply the new
number after the last octet.
The module must be restarted to work with the
new configuration.
5.11

Module information

Fig. 5-6: Module information
► Scroll through the M
Odule infOrMatiOn
pressing the arrow button.
The information displayed is the product name, module
updates and MacID.
www.balluff.com
menu by briefly
english 23