Settings - Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung

BNI EIP-508-105-Z067
Network interface
6
WebUI/web interface (continued)
6.6

Settings

The S dialog enables the configuration of connected
ettingS
modules and IO-Link devices. Click on the corresponding
icon in the navigation bar (see chapter 6.2 on page 25)
to access the Settings dialog.
Changing and saving settings as well as
implementing restarts and resetting to factory
defaults can only be performed by users with
corresponding authorizations (adMin, eXpert).
Module
Under M , general settings, such as the module name,
Odule
device time and network settings can be made. Settings
can be applied by clicking on Save and permanently
stored in the device.
The module time can be set as follows:
1. Under M (see Fig. 6-28), either enter the M
Odule
t manually by clicking on the calendar icon or
iMe
transfer the current browser time to the IO-Link master
via the S pc dialog.
et frOM
Fig. 6-28: Setting the module time
2. Apply the settings permanently by clicking on Save.
The module time is not permanently stored.
After a reset, reboot or a deenergized phase,
the time begins in the year 2000 again.
www.balluff.com
The ip a
ddreSS
can be reset separately via the factOry default button
(see Fig. 6-29).
Fig. 6-29: Network settings
reStart restarts the module (like switching the power
Odule
supply off and on).
factOry default completely deletes the configuration
saved in the device and them performs a reboot. The
device is reset to the delivery state.
, S and g
M a
ubnet aSK ateway ddreSS
english
fields
35