Herunterladen Inhalt Inhalt Diese Seite drucken
Balluff BNI PNT-508-105-Z067 Montageanleitung
Vorschau ausblenden Andere Handbücher für BNI PNT-508-105-Z067:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BNI PNT-508-105-Z067
BNI PNT-508-105-Z077
BNI PNT-538-105-Z067
BNI PNT-538-105-Z077
deutsch
Montageanleitung
english
Installation guide

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Balluff BNI PNT-508-105-Z067

  • Seite 1 BNI PNT-508-105-Z067 BNI PNT-508-105-Z077 BNI PNT-538-105-Z067 BNI PNT-538-105-Z077 deutsch Montageanleitung english Installation guide...
  • Seite 2: Netzwerkschnittstelle

    Defekt des Prokukts keine Gefahren für Personen und Sachen entstehen können. Eine ausführliche Betriebsanleitung und weitere Informatio- nen zu diesem Produkt finden Sie unter www.balluff.com Das Produkt darf nicht geöffnet, umgebaut oder verändert auf der Produktseite. werden. Bei Defekten und nichtbehebbaren Störungen des Produkts ist dieses außer Betrieb zu nehmen und gegen...
  • Seite 3: Anzeigeelemente

    Port/Pin-LEDs Kein Fehler – LED 00 – Port-Pin 4 – LED 01 – Port-Pin 2 Geringe Geschwindigkeit des physischen Links; oder kein physischer Link Rot blinkend Kein Datenaustausch oder keine Konfiguration Übertragungsrate: 10 Mbit/s Gelb Übertragungsrate: 100 Mbit/s XF1/2 Grün blin- Datentransfer kend www.balluff.com deutsch...
  • Seite 4: Einbau

    – Aufgrund der galvanische Trennung von BNI PNT-538-… dürfen Geräte ohne galva- +24 V US Modul-/Sensor- nische Trennung wie z. B. versorgung BNI PNT-508-105-Z067 nicht mit der gleichen Stromquelle versorgt werden. GND UA Aktorversorgung – Die Gesamtstromstärke für die Sensor- und GND US Sensorversor- Aktorversorgung darf jeweils 16 A nicht über-...
  • Seite 5: Kabelverlegung

    Einstellbar auf 1 A, 2 A und 4 A unter Berücksichtigung des Summenstroms von 16 A und des maximalen Summenstroms von 4 A auf dem GND-Pin des Ports Variante I/O-Port Class A Class B BNI PNT-508-105-Z067 X00…X07 n.a. BNI PNT-508-105-Z077 BNI PNT-538-105-Z067 X00…X03 X04…X07 BNI PNT-538-105-Z077 Für die digitalen Sensoreingänge, siehe Richtlinie...
  • Seite 6 BNI PNT-5_8-105-Z0_7 Netzwerkschnittstelle UL-Anforderungen Spannungsversorgung Kabelgrößen Die Spannungsversorgung muss ein isolierter Typ oder ein Stromversorgungskabel: SELV-Typ sein. Gelistetes oder R/C-Kabel (CYJV2/8) mit M12-Innenge- winde und L-codiertem Stecker mit mindestens 24 V, Reinigung mindestens 16 A für alle Modelle. Mit S, SJ, SO, ST, SV Das Produkt nur mit einem trockenen oder nur mit Wasser oder R/C (AVLV2) gelistete Kabel, die auf der UL Style angefeuchteten Tuch reinigen!
  • Seite 7: Network Interface

    A comprehensive user’s guide and additional information The product must not be opened, modified or changed. If about this product can be found at www.balluff.com on defects and unresolvable faults occur in the product, take the product page.
  • Seite 8 BNI PNT-5_8-105-Z0_7 Network interface Construction and function Display elements FE connection Mounting hole Port/Pin LEDs Standard-Port Display Meaning State of input or output pin is 0 PROFINET Port 1 PROFINET Port 2 Yellow State of input or output pin is 1 Both LEDs Short circuit of sensor supply between flashing red...
  • Seite 9: Electrical Connection

    – Due to the galvanic isolation of BNI PNT-538-…, devices without galvanic isolation such as the BNI PNT-508-105-Z067 must not be supplied with the same power source. – The total current for the sensor and actuator +24 V US...
  • Seite 10 Adjustable to 1 A, 2 A and 4 A, taking into account the total current of 16 A and the max. total current of 4 A on the GND pin of the port Variant I/O-Port Class A Class B BNI PNT-508-105-Z067 X00…X07 n.a. BNI PNT-508-105-Z077 BNI PNT-538-105-Z067 X00…X03 X04…X07...
  • Seite 11 UL requirements Power supply Cord Sizes Power In cord assembly: The power supply has to be an isolated type or SELV type. Listed or R/C (CYJV2/8) cord assembly with threaded Cleaning female M12 L-coded connector rated 24 V minimum, 16 A Clean the product only with dry cloth or cloth dampened minimum for all models.
  • Seite 12 Americas Service Center Asia Pacific Service Center Poland Greater China Balluff Sp. z o.o. Balluff Inc. Balluff Automation (Shanghai) Co., Ltd. Ul. Graniczna 21A 8125 Holton Drive No. 800 Chengshan Rd, 8F, Building A, 54-516 Wrocław Florence, KY 41042 Yunding International Commercial Plaza...

Inhaltsverzeichnis