Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung Seite 59

BNI EIP-508-105-Z067
Network interface
3
Configuration via Explicit Messages (continued)
2. In the Source Element Array (Write) enter which index
should be read (in this example Index 0x4E).
Fig. 3-4: Enter Source Element Array
⇒ The read value is displayed in the Destination Array
(Read).
⇒ The error code is also displayed there in the event
of a parameterization error.
3. In the c window select the Ethernet
OMMunicatiOn
module for which parameters should be set.
Fig. 3-5: Select Ethernet module
www.balluff.com english 15