Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung Seite 54

BNI EIP-508-105-Z067
Network interface
2
System integration (continued)
Upload flag at IO-Link device
The upload flag is required in order to overwrite data
already saved in the parameter server with new parameter
data of the same IO-Link device.
In order to activate the upload flag of an IO-Link device,
the data value 0x05 must be entered in the index 0x02,
subindex 0.
(For information on setting parameters via IO-Link, see I/O
ports on page 36 or IO-Link device parameterization on
page 14).
10 english