Process Data; Process Data Inputs; Standard Input Data - Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung

BNI EIP-508-105-Z067
Network interface
4

Process data

4.1

Process data inputs

The input data have a size of 392 bytes. The table below
shows the assignment of the process data inputs.
Byte Module part
0...7 Standard I/O
ports
8...55 IO-Link Port 0
56...103 IO-Link Port 1
104...151 IO-Link Port 2
152...199 IO-Link Port 3
200...247 IO-Link Port 4
248...295 IO-Link Port 5
296...343 IO-Link Port 6
344...391 IO-Link Port 7
Tab. 4-1: Process data inputs BNI EIP-508-105-Z067
4.1.1

Standard input data

Byte
7 6 5
0 I32 I34 I22
1 I72 I74 I62
2 S3 S2
3 S7 S6
4 O32 O34 O22
5 O72 O74 O62
6 0 0 0
7 0 0 0
Tab. 4-2: Standard input data
www.balluff.com
Description
Process data inputs for the
standard inputs
Process data inputs for the
IO-Link Port 0
Process data inputs for the
IO-Link Port 1
Process data inputs for the
IO-Link Port 2
Process data inputs for the
IO-Link Port 3
Process data inputs for the
IO-Link Port 4
Process data inputs for the
IO-Link Port 5
Process data inputs for the
IO-Link Port 6
Process data inputs for the
IO-Link Port 7
Bit
4 3 2 1
I24 I12 I14 I02
I64 I52 I54 I42
S1 S0
S5 S4
O24 O12 O14 O02
O64 O52 O54 O42
0 0 NA PS
0 0 0 0
Description
0
I04 Input data
I04: Input for port 0, pin 4
The result is only 0 when the port is configured as an
I44
IO-Link Port.
Short circuit status
Short circuit between pin 1 and 3 at reported port
O04 Overload status
O04: Overload at port 0, pin 4
O44
Only if the port is configured as an output.
PA Status of power supply
NA: No actuator supply
PS: Power supply of sensor
PA: Power supply of actuator
0 reserved
english 17