Display; Address Details; Control And Display; Display Information - Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung

BNI EIP-508-105-Z067
Network interface
5

Display

5.1 General
With the installed display the address is displayed directly
on the devices.
The following address types are possible:
– IP address
– Subnet mask
– Gateway address
Each address consists of 4 octets.
The display also shows information about the update of
the hardware and firmware.
The display has a lock function which can be activated
from the system control. Editing is no longer possible if the
lock is set.
5.2

Address details

IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.1
5.3

Control and display

1 Display
2 Arrow button
3 Octet cursor
Fig. 5-1: Explanation of the control panel
5.4

Display information

Cursor to select the address type
IP
SN
GW
3
IP: IP address
SN: Subnet address
GW: Gateway address
Fig. 5-2: Explanation of display
20 english
4 Address type cursor
5 Set button
6 LEDs
2 1 0
Cursor to select the octet
3 First octet
2 Second octet
1 Third octet
0 Fourth octet
5.5

Design and symbols

In the following diagrams, a number of symbols are used
to describe the display functionality:
Symbol Meaning
Current state
Switch
Press the Set button briefly
Press the Set button for several seconds
(≥ 3 s)
Press the arrow button briefly
Tab. 5-1: Explanation of symbols
5.6

Startup

BALLUFF
Module name
Hardware and firmware
update
Current IP
Current subnet mask
Current gateway address