BNI EIP-508-105-Z067
Network interface
6
WebUI/web interface (continued)
Opening the port dialog
► Click on the corresponding port field to select the
desired IO-Link port.
Fig. 6-15: Selecting the IO-Link port in the breadcrumb
► Alternatively, select the target port via the breadcrumb
navigation in the header.
Fig. 6-16: Selecting the IO-Link port in the breadcrumb
navigation
The IO-Link device data is only displayed if the
port is configured as an IO-Link port (can be
identified by the green port LED).
www.balluff.com
english
29