Fusion Preparation - Gf Msa 330 Bedienungsanleitung

2 Fusion process
Advise
12
The message above is an advice, to inform the user the fusion process
may not be concluded successfully due to internal temperature of the
machine. Since the fittings have different curves depending on
manufacturer, size, technology parameters, it does not prevent the user
for going forward, if he is sure, based on his experience, the fitting can
be welded.
2.7

Fusion preparation

To use the FUSION PREPARATION function, this option has to
be enabled in the configuration menu (see 'Configuration'
chapter).
If FUSION PREPARATION alert is activated, the display shows a message
which requires confirming the pipes preparation (scraping, cleaning, and
alignment) has been done. If it has been executed, press START/OK ( I )
to start the fusion process.
The preparation
(scraping, cleaning, and alignment) are essential to ensure
the quality of the welding.
Operating Manual MSA 330 / MSA 340
PIPE ENDS PREPARED?
(peel, clean, Align)
01.01.08 15:20
of the pipes
Esc OK
according to guidelines