Profile Characteristic - Balluff Bos R254K-Uui-Re10-S4 Konfiguration

BOS R254K-UUI-RE10-S4
Photoelectric Sensors
6
System Functions (continued)
6.8

Profile Characteristic

6.8.1 Description
Profile Characteristic is a readable parameter that provides
information about which IO-Link profiles are supported. It
is used mainly to allow profile function modules of the
control unit to detect which profile or functions on the
device are available.
This parameter is defined in the IO-Link specification.
6.8.2 ISDU
Name
Profile Characteristic 0x000D (13)
Tab. 6-28: Profile Characteristic – ISDU
The parameter can be read via Sub index 0 and consists of
multiple profile indices (each 16 bits) and function classes.
If a profile ID is specified, this means that all included
function classes are supported. If only sub-functions are
supported, these are output explicitly as an individual
function class.
The following function classes are supported:
Variant Function Class
1 0x8000 (32768)
0x8003 (32771)
0x8004 (32772)
0x8006 (32774)
0x8007 (32775)
0x8008 (32776)
0x8009 (32777)
0x800C (32780)
0x8100 (33026)
2...4 0x8000 (32768)
0x8001 (32769)
0x8003 (32771)
0x8004 (32772)
0x8007 (32775)
0x8008 (32776)
0x8009 (32777)
0x800C (32780)
0x8100 (33026)
Tab. 6-29: Profile Characteristic – supported function classes
98 english
Index Sub index Access
0
Length Data Type
R 18 Byte UINT16[]
Name
Device Identification
Device Diagnosis
Teach Channel
Adjustable Switching Signal Channel
Teach-in single value
Teach-in two value
Teach-in dynamic
Transducer Disable
Extended Identification
Device Identification
Type 0 Generic Profiled Sensor
Device Diagnosis
Teach Channel
Teach-in single value
Teach-in two value
Teach-in dynamic
Transducer Disable
Extended Identification
Data Default
Storage
n/a n/a