Balluff BOS R254K-UUI-RE10-S4 Konfiguration Seite 194

BOS R254K-UUI-RE10-S4
Photoelectric Sensors
6
System Functions (continued)
Behavior IO-Link
With Behavior IO-Link, the behavior of the pins during
active IO-Link communication can be determined. The pin
can either continue to perform its function or become
inactive.
Value Name
Pin 4
0x00 (0) IO-Link
Pin 2
0x00 (0) Inactive
0x01 (1) Normal
Operation
Tab. 6-12: Pin assignment – Behavior IO-Link
Mode
The function of the pin can be selected with Mode.
Value Name
0x00 (0) Inactive
0x01 (1) Digital
Output
0x02 (2) Analog
Output
0x03 (3) Digital Input
Tab. 6-13: Pin assignment – Mode
90 english
Description
This is the communication pin.
It cannot execute any other
function during an active
IO-Link connection.
The pin has no function and is
high-impedance.
The pin retains its function.
Description
The pin has no function and is
high-impedance.
The pin works as a digital
output.
The pin works as an analog
output.
The pin works as a digital
input.
Signal Source
With Signal Source, the internal signal source for the pin
can be selected. Various signal sources are available that
can be output or read on a pin.
Value Name
Digital Output
0x0003 (3) Switching Counter Limit not reached
0x0004 (4) Switching Counter Limit reached
0x0005 (5) Switching Counter Limit exceeded
0x0008 (8) Signal Delay Channel 1
0x0009 (9) Signal Delay Channel 2
0x000A (10) Signal Delay Channel 3
0x000B (11) Signal Delay Channel 4
0x0010 (16) Switching Speed ok
0x0011 (17) Switching Speed too low
0x0012 (18) Switching Speed too high
0x0015 (21) Short Circuit Pin 4
0x0016 (22) Short Circuit Pin 2
0x0017 (23) Undervoltage
0x0018 (24) Overvoltage
0x001A (26) Cable break pin 2
0x0021 (34) Signal Quality Bad
0x0023 (36) Humidity Bad
0x0027 (39) Transducer Enable
0x002E (46) Switching Threshold Adaption Alarm
0x002F (47) System Error
0x0037 (55) Inclination Alarm
0x0038 (56) ADSS1
0x003A (58) LSSC1
0x003B (59) LSSC2
0x003C (60) LSSC3
0x003D (61) LSSC4
0x0041 (65) Lifetime Extreme
0x004B (75) Vibration Alarm Status
0x0063 (99) Logic block result 1
0x0064 (100) Logic block result 2
0x0065 (101) Logic block result 3
0x0066 (102) Logic block result 4
Digital Input
0x0002 (2) Digital Input Pin 2
0x0007 (7) Switching Counter Reset
0x0014 (20) Switching Speed Reset
0x0027 (39) Transducer Enable
0x003E (62) Teach In