Use Only As Authorized - Scheppach HS510 Originalanleitung

m Use only as authorized
The machine corresponds to the valid EC guideline.
• The log saw is constructed as 1-man-operating stand
and is only to be used in outdoor locations.
• The log saw is a portable circular saw. It is only ap-
plicable to cross cut firewood with a feeding rocker
according to the technical specifications.
• The saw is constructed solely for cross cutting of
firewood.
• Regardless of the diameter of the wood only 1 work
piece is to be put on the rocker.
• Observe all safety and hazard notes on the machine
and ensure they are kept complete and in a legible
condition.
• The machining range and surrounding areas of the
machine must be clear of interfering foreign matter
to prevent accidents occurring.
• Workpieces must be completely free of foreign ob-
jects, i.e. nails or screws.
• The circular sawbench is designed exclusively for
the machining of wood and materials similar to wood.
Only original Scheppach tools and accessories may
be used. Use the required sawblade in accordance
with the EN 847-1 norm depending on the type of
cut and type of wood (solid wood, plywood or chip-
board). Please observe the „Special Tool Accesso-
ries".
• The machine must only be used in technically per-
fect condition in accordance with its designated use
and the instructions set out in the operating manual,
and only by safety-conscious persons who are fully
aware of the risks involved in operating the machine.
Any functional disorders, especially those affecting
the safety of the machine, should therefore be recti-
fied immediately.
• Relevant accident prevention regulations and other,
generally recognized safety-technical rules must also
be adhered to.
17