Use Only As Authorized - Scheppach HS700GE Anleitung

• Dispose of used engine oil in accordance with the
customary rules. Turn off the engine immediately if
you notice unusual noises or vibrations.
• Unusual noises or vibrations are usually warnings of
major problems.
m Use only as authorized
The machine corresponds to the valid EC guideline.
• The log saw is constructed as 1-man-operating stand
and is only to be used in outdoor locations.
• The log saw is a portable circular saw. It is only ap-
plicable to cross cut firewood with a feeding rocker
according to the technical specifications.
• The saw is constructed solely for cross cutting of
firewood.
• Regardless of the diameter of the wood only 1 work
piece is to be put on the rocker.
• Observe all safety and hazard notes on the machine
and ensure they are kept complete and in a legible
condition.
• The machining range and surrounding areas of the
machine must be clear of interfering foreign matter
to prevent accidents occurring.
• Workpieces must be completely free of foreign ob-
jects, i.e. nails or screws.
• The circular sawbench is designed exclusively for the
machining of wood and materials similar to wood.
Only original Scheppach tools and accessories may
be used. Use the required sawblade in accordance
with the EN 847-1 norm depending on the type of cut
and type of wood (solid wood, plywood or chipboard).
Please observe the „Special Tool Accessories".
• The machine must only be used in technically perfect
condition in accordance with its designated use and
the instructions set out in the operating manual, and
only by safety-conscious persons who are fully aware
of the risks involved in operating the machine. Any
functional disorders, especially those affecting the
safety of the machine, should therefore be rectified
immediately.
• Relevant accident prevention regulations and other,
generally recognized safety-technical rules must also
be adhered to.
• The Scheppach machine may only be used, main-
tained, and operated by persons familiar with it and
instructed in its operation and procedures. Arbitrary
alterations to the machine release the manufacturer
from all responsibility for any resulting damages.
17