Herunterladen Inhalt Inhalt Diese Seite drucken

Counter Function; Selector Locking Function (Only Z14 Model); Changing Operational Mode (Only Self-Service 230V Model) - Zummo Z14 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Z14:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 39
(Self-service Model) Once you release the tap, the juicer will finish the cycle, so the cups stops at the
initial correct upright position, and the digital screen displays a "Clock icon and a Stop sign". Once the
machine stops, the screen will display an orange icon, indicating that the juicer is ready to squeeze
again. The cups must always be in an upright position.
6

COUNTER FUNCTION

The display stores the total number of cycles* completed. To visualize the figure,
With the machine stopped and in stand-by, press the STOP button
The figure will appear on the display for a few seconds.
Bear in mind that all machines show a minimum of 400 to 500 cycles completed for quality control
testing.
*(cycle = complete set of movements to squeeze a piece of fruit)
7

SELECTOR LOCKING FUNCTION (only Z14 model)

In order to lock the SELECT button to avoid unwanted changes of the number of fruits to squeeze,
carry out the following operations:
Select the number on the display you wish to lock.
Press the button ON and wait until the machine stops.
Switch off the machine using the power switch.
Being the machine switched off, press and hold STOP.
Switch on the power keeping STOP button pressed for four seconds.
The display will show a four digits number.
Press the button SELECT (this button controls the two right digits) and press the button ON (this
button controls the two left digits) at the same time to select the number 7437.
Press STOP and the display will show - - - -
Turn off the machine using the power switch. If you fail to do this, the display will keep showing the
message - - - -
Switch on the machine. Now the SELECT button is locked and the display will show Lock.
To unlock the SELECT button, repeat exactly the same operation.
8
CHANGING OPERATIONAL MODE (self-service 230V model)
TO GO FROM SELF-SERVICE TO NORMAL OPERATING MODE (from self-service to Z14)
Turn off the machine by the main power switch.
With the machine turned off, press STOP, keep it held down, and then turn the main power switch on,
holding it for 4 seconds, until a screen with four numbers appears.
18
COUNTER

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cg114

Inhaltsverzeichnis