Stopping; Counter Function; Selector Locking Function (Z40 Model Or Z40 Service Model) - Zummo Z40-LM Bedienungsanleitung

6.2. STOPPING

(Z40 Model or Z40 service Model) To stop the machine when is operation, press the Stop
button. The display will show a timer and the message Stop. The machine will stop once finish
the cycle. Once the machine completely stops, the display will show again the number of fruits
to squeeze.
(Z40 Self-service Model) Once you release the tap, the juicer will finish the cycle, and the digital
screen displays a "Clock icon and a Stop sign". Once the machine stops, the screen will
display an orange icon, indicating that the juicer is ready to squeeze again.

6.3. COUNTER FUNCTION

The display stores the total number of cycles* completed. To visualize the figure,
 With the machine stopped and in stand-by, press the STOP button
 The figure will appear on the display for a few seconds.
Bear in mind that all machines show a minimum of 1200-1300 cycles completed for quality
control testing.
*(Cycle = complete set of movements to squeeze a piece of fruit)
6.4. SELECTOR LOCKING FUNCTION
In order to lock the SELECT button to avoid unwanted changes of the number of fruits to
squeeze, carry out the following operations:

Select the number on the display you wish to lock.

Press the button ON and wait until the machine stops.

Switch off the machine using the power switch.

Being the machine switched off, press and hold STOP.

Switch on the power keeping STOP button pressed for four seconds. The display will
show a four digits' number.

Press the button SELECT (this button controls the two right digits) and press the button
ON (this button controls the two left digits) at the same time to select the number 7437.
Press STOP and the display will show - - - -. Turn off the machine using the power
switch. If you fail to do this, the display will keep showing the message - - - -

Switch on the machine. Now the SELECT button is locked and the display will show
Lock.
To unlock the SELECT button, repeat exactly the same operation.
30
(Z40 models or Service models)