Stopping; Counter Function; Safety Systems - Zummo ZG14 Bedienungsanleitung

x
x
5
Once you release the tap, the juicer will finish the cycle, so the cups stops at the initial correct
upright position, and the digital screen displays a "Clock icon and a Stop sign". Once the
machine stops, the screen will display an orange icon, indicating that the juicer is ready to
squeeze again. The cups must always be in an upright position.
6
The display stores the total number of cycles* completed. To visualize the figure,
ƒ
ƒ
Bear in mind that all machines show a minimum of 400 to 500 cycles completed for quality
control testing.
7
The machine has various safety systems:
Downloaded from www.Manualslib.com
When you press the tap down, the juicer will start working and the screen will display a
Clock icon and the word "Run", while the machine is working. In order to stop the machine,
just release the tap.
ATTENTION!!!: Do NOT place your hand into the basket while the machine is operating
(Fig.23).

STOPPING

COUNTER FUNCTION

With the machine stopped and in stand-by, press the STOP button.
The figure will appear on the display for a few seconds.
*(cycle = complete set of movements to squeeze a piece of fruit)

SAFETY SYSTEMS

1 If the Front Cover is not assembled or is improperly assembled, the display will
show an Error message with the Front Cover and Hopper symbols flashing.
manuals search engine
COUNTER
15