Herunterladen Inhalt Inhalt Diese Seite drucken

Comfort Adjustments - Vermeiren Sigma Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Sigma:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81
Transfer
1. Position the wheelchair as close as possible to you when sitting
in your chair, couch, seat or bed.
2. Apply the brakes by turning the free-wheel lever to braking
position, see § 3.4.
3. Use the operating console to move the backrest and seat to
sitting position, see user manual of the console.
4. Fold the footplate(s) upwards to prevent standing on them.
5. If necessary, turn one armrest back/up to make room, see
§ 3.7.1.
6. Transfer to/from the wheelchair using the strength of your arms
or with the help of attendant(s) or lifting equipment.
Sitting in the wheelchair
1. Sit down on the seat with your lower back against the backrest.
2. Turn the footplate(s) down and put your feet on the footplates.
3. Turn armrests down, if applicable.
4. Make sure that your upper legs are horizontal and that your feet are in a comfortable position.
Adjust if necessary, see § 3.7.4 and § 3.7.5.
5. Make sure that your arms are bent and are resting comfortably on the arm pads. Adjust if
necessary, see § 3.7.1 and § 3.7.2.
Adjusting to stable position
For transport purposes and when you need to negotiate obstacles, the wheelchair must be
adjusted to maximise its stability:
Seat in horizontal position
Backrest upright
Armrests in bottom position
Footplate folded up or adjusted to a higher position to prevent touching the obstacle.
Operating console turned inwards.
3.7

Comfort adjustments

CAUTION
• The following comfort adjustments can be done by the attendant or caretaker. All other
adjustments are done by your specialist dealer according to the installation instructions, see
preface.
• Always keep the swing range of footrest and operating console in mind to prevent bystanders
from getting injured or objects from being damaged.
• Make sure that your fingers, clothes, buckles don't get trapped during adjustment.
3.7.1 Operator console
The operator console has a swivel system and can be turned
horizontally to the left/right.
Grab the control support (26) below the operator console and
move it left/right to the desired position.
Risk of injuries or damage
15
EN
Sigma, Sigma 230
2020-09
Using your wheelchair
NL
26

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sigma 230

Inhaltsverzeichnis