Manual Pre-Cleaning With Ultrasound And - B. Braun Aesculap Spine TSPACE PEEK Gebrauchsanweisung/Technische Beschreibung

en
3.10.2 Manual pre-cleaning with ultrasound and brush
Phase Step
I Ultrasonic cleaning
II Rinsing
D–W: Drinking water
RT: Room temperature
*Recommended: BBraun Stabimed fresh
►
Note the information on appropriate cleaning
brushes and disposable syringes, see Validated
cleaning and disinfection procedure.
Phase I
►
Clean the product in an ultrasonic cleaning bath
(frequency 35 kHz) for at least 15 min. Ensure that
all accessible surfaces are immersed and acoustic
shadows are avoided.
►
Clean the product with a suitable cleaning brush in
the solution until all discernible residues have been
removed from the surface.
►
If applicable, brush through non-visible surfaces
with an appropriate cleaning brush for at least
1 min.
►
Mobilize non-rigid components, such as set screws,
links, etc. during cleaning.
►
Thoroughly rinse through these components with
the cleaning disinfectant solution (at least five
times), using a disposable syringe.
16
T t Conc.
[°C/°F] [min] [%]
RT (cold) >15 2
RT (cold) 1 -
Phase II
►
►
Water Chemical
quality
D–W Aldehyde-free, phenol-free, and
QUAT-free concentrate, pH ~ 9*
D–W -
Rinse/flush the product thoroughly (all accessible
surfaces) under running water.
Mobilize non-rigid components, such as set screws,
joints, etc. during rinsing.