Operation; Switching On For The First Time; Language Settings; Network Setup - Renkforce 2356115 Bedienungsanleitung

10. Operation

a) Switching on for the first time
• Press and hold the
The start-up process takes a few seconds.
b) Language settings
When the device is switched on for the first time, or if you had previously reset it to factory default settings,
the language selection appears on the display (1) after switching on.
• Use the arrow buttons (26) or the rotary knob (6) to select the desired language and press the OK button (24) or
the rotary knob (6) to confirm.
c) Network setup
When the device is switched on for the first time, or if you had previously reset it to factory default settings,
the display (1) will ask whether the network should be set up after setting the language.
• Use the arrow buttons (26) or the rotary knob (6) to select "YES" and press the OK button (24) or the rotary knob
(6) to confirm.
• On the next screen, select "ADD/REMOVE AP" and confirm again as described above.
• There are 3 different ways to establish the network connection:
Option 1 - Login with the WPS button (easy option).
• On the next screen, select "ADD AP (WPS BUTTON)" and confirm again as described above.
• Within 2 minutes, press the WPS button on your Wi-Fi router to establish the connection.
button (9) on the device, until the display (1) lights up.
51