Connecting Headphones; Operation; Switching On For The First Time; Language Settings - Renkforce RF-IR-200 Bedienungsanleitung

b) Connecting headphones
You can connect headphones to the
• Connect the headphones plug to the
• If the headphones plug does not fit into the jack, use an adapter.
When the headphones are connected to the jack
only the headphones play sound.

10. Operation

a) Switching on for the first time
Keep the button (2) on the device pressed until the display (7) goes on.
The start-up process takes a few seconds.
b) Language settings
When the device is switched on for the first time, or if you had previously reset it to factory default settings,
the language selection appears on the display (7) after switching on.
Use the rotary knob (11) to select the desired language and press it to confirm.
jack (13) if required.
jack (13).
(13), the built-in loudspeaker turns off. In this case,
41