Fm Radio Mode - Renkforce 2356115 Bedienungsanleitung

Calling up station information
During playback of a station, you can call up further information about this station or the track currently being played
or the time and date.
The information available depends partly on the station's broadcast content. It may take some time for all
contents to become available.
• Press and hold the arrow button > (26), or the
Manage station list
• Highlight the station to be edited in the station list.
• Press the arrow button > (26).
• Further options will appear in the menu with which the station can be moved or deleted.
i) FM radio mode
For this mode, the antenna (10) must be extended completely. A network connection is not required for this
mode. If only a few or no stations can be received, change the orientation of the antenna (10) and/or the
location of the device. Placing the unit near a window has a positive effect on the reception quality.
Scan for FM radio stations
• Press the button (3) and select the "FM RADIO" option using the rotary knob (6) or the arrow buttons (26).
The "FM RADIO" option can also be accessed directly by pressing the MODE button (28).
• Press the rotary knob (6) or the OK button (24) to confirm the selection.
When this mode is called up for the first time or no FM scan has been performed yet, the device asks
whether it should start a station scan. Press the rotary knob (6) or the OK button (24) to perform the scan.
• After the station scan has been performed, a list of receivable stations is displayed.
button (7) on the device to display further information.
61