Renkforce 2356115 Bedienungsanleitung Seite 53

Option 3 - Login by entering the network key.
• On the next screen, select "ADD AP (SCAN)" and confirm again as described above.
• The device now searches for all detectable Wi-Fi routers in the vicinity and lists them.
• Select the desired Wi-Fi router and confirm your entry.
• Enter the network key of your Wi-Fi router. Use either the numeric keypad (21) or the arrow buttons (26) of the
remote control or turn the rotary knob (6) to select the required digits and characters.
Entering characters using the remote control's numeric keypad (10)
Button Digits
1 1, various special characters (see display)
2 2, A, B, C, a, b, c
3 3, D, E, F, d, e, f
4 4, G, H, I, g, h, i
5 5, J, K, L, j, k, l
By pressing digits 0, 1, 2, etc., e.g. when entering a password, the numbers and letters (alphanumeric
characters) appear as listed above. Each time you press the button, the display advances by one digit or
letter.
For example, when you press button (5), number "5" is displayed first. Press the button again, the capital
letter "J" will be displayed, and so on.
• When the desired character appears, press the OK button (24) or the rotary knob (6) to enter the next character.
• Press the arrow button " " (26) on the remote control or the
entered.
When entering the password, please note that it is case-sensitive.
• Once all characters have been entered, confirm the network key by pressing and holding the rotary knob (6).
• A message appears stating that the network connection has been established and the display changes to the main
menu.
• The reception quality is shown at the top left of the display (1). The more bars are displayed, the better is the
connection to the network.
Button Digits
6 6, M, N, O, m, n, o
7 7, P, Q, R, S, p, q, r, s
8 8, T, U, V, t, u, v
9 9, W, X, Y, Z, w, x, y, z
0 0, DEL
button (5) on the device , to delete the last character
53