Alarm Function; Setting The Alarm; Switching Off The Alarm - Renkforce 2356115 Bedienungsanleitung

n) Alarm function
The alarm function works only when the device has been switched to standby mode. When the device is
switched off (dark display), the alarm function is not active.
Configuring the alarm settings
• Press the button (3), use the rotary knob (6) or the arrow buttons (26) to select the option "ALARM" and confirm
the selection.
The option "ALARM" can also be accessed directly by pressing the

Setting the alarm

The device has two separate alarm times, which can be set and used separately. Each of the alarm times is configured
in the same way.
• In the alarm clock menu, select the desired alarm and turn it on.
• Now set the alarm time, alarm tone, alarm days, alarm volume, and alarm duration.
When waking with radio sound, you must select a station from your saved favourites or the station lists of
DAB or FM radio.
• The alarm is now active and set up. You can now exit the menu.
• A corresponding symbol appears on the display (1) when the alarm clock function is activated.
The alarm function only works in standby mode, not in off mode.

Switching off the alarm

• When the alarm sounds, you can switch it off by pressing the
• The alarm is thus switched off until the next alarm time.
• To disable the alarm completely, navigate to the alarm menu and switch off the enabled alarm.
• The current alarm settings will still be retained.
button (19)..
button (9).
69