Operation; General Functions - Renkforce 1598214 Bedienungsanleitung

All manuals and user guides at all-guides.com

10. Operation

a) General Functions
Switching On/Off
• Switch the power supply on or off with the ON/OFF switch (10).
ON > Power supply is switched on
OFF > Power supply is switched off
• Push the button
After first activation, the device will automatically perform a station scan in the DAB
reception range. During the search, the display (9) shows progress and the number of
stations found.
After completion of the station scan, the first station in the station list is played back.
If no stations are found, no signal could be received. In this case, move the device
or align the aerial (14) differently, and perform the station scan again. Check if DAB
stations are broadcast in your area.
When switching on again, the device will start up with the last chosen operating mode.
• Push the button
In standby mode, the display (9) shows the time and date.
Selection of the operating mode
• Press the button MODE (1) with the device switched on in order to switch between DAB
mode, FM mode and playback via the LINE IN (12) port.
Setting the volume
The volume is adjusted via the connected audio system or the active speakers.
32
(5) to switch on the device.
(5) again in order to switch off the device again (standby mode).