Cleaning And Maintenance - Renkforce 2356115 Bedienungsanleitung

You cannot share folders because the feature is not displayed
• Enable file sharing in your system.
The device has to buffer the selected station again and again and playback stalls
• The radio streams Internet radio stations over a broadband connection. If your Internet bandwidth is too low or other
users are downloading large amounts of data, playback may be intermittent.
• Try setting the buffer time for the buffer higher in the settings menu.
In this case, buffering means that the device first downloads a small part of the stream from the Internet,
stores it, and only then starts playback. This normally ensures that audio data are played without
interruption.
• Check your Internet connection and try switching to another station.
FM or DAB radio reception is disturbed or not possible
• Extend the antenna to its full length and try different orientations.
• Set up the device in another location (as close to a window as possible).
• Check if DAB broadcasting is generally available in your area.
Any repair work other than that described above must be carried out by an authorised technician.

12. Cleaning and maintenance

Always observe the following safety instructions before cleaning or servicing the device:
Live components may be exposed when the housing is opened or components are removed. The device
must be disconnected from all power supplies before carrying out any servicing or repair work.
Capacitors inside the device may still carry a voltage when they have been disconnected from the power
supply.
Repair work must only be done by qualified technicians who are familiar with the potential hazards and the
relevant regulations.
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
housing or prevent the product from functioning properly.
• Disconnect the product from the power supply before cleaning.
• Use a dry, lint-free cloth to clean the product.
75