Technical specifications for suction unit:
− Voltage, alternating current:
− Current consumption of 1 motor:
− Current consumption of 2 motors:
− Main fuse:
− Suction motor output:
− Airflow:
− Length of suction hose:
− Length of connecting cable:
− Dimensions:
− Weight:
− Noise level:
Technical specifications for immersion pump:
− Alternating current:
− Current consumption:
− Power consumption:
− Motor speed:
− Delivery height:
− Volume:
Technical specifications for standard cleaning attachment FLEX:
Overall width 280 mm, Overall length 200 mm, Working width approx. 230 mm
Working pressure 60 - 200 bar.
Water infeed max. 20 l / min.
Water temperature max. 80° C
Scope of delivery of your Power HD Krake:
Standard cleaning attachment FLEX complete with sealing brushes
Suction hose 10m
Discharge hose 10 m
Suction unit complete with filter, immersion pump and trolley
Connecting lead with ground fault circuit interrupter protected plug
Instruction manual
Intended use:
The Power high-pressure squeegee is designed as a wet cleaning device in combination with a high-pressure cleaner
with max. 200 bar operating pressure and a max. water temperature of 80°C for splash-free cleaning of surfaces
indoors and outdoors.
Foreseeable misuse – NOT PERMITTED –
Processing of:
•
low molecular weight hydrocarbon compounds (e.g. nitro)
•
Paint strippers containing CFCs
•
highly flammable/explosive media
•
media with high chlorine and acidic content and high alkaline content
•
operation in areas with explosion protection
•
Unintended use
•
Processing unsuitable media
•
Modifications to the device
•
Use of wear parts not approved by the manufacturer
230 V, 50 Hz
5.5 A
11 A
16 A
2 x 1,220 watts
max. 5,800 l/min
max. 30 metres
max. 30 m, 2.5 mm², completely unwound
L 701 mm x W 610 mm x H 1,345 mm
49 kg
77 db (A)
230 V, 50 Hz
1.4 A
320 W
2,800 rpm
1 / 3 / 5 / 7 m.
11 / 9 / 6 / 1 cubic metres / hr.
59
Translation of the original instruction