Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Thank you very much
for purchasing a STORCH product. You have chose
a quality product. If you would like to suggest an
improvement, or do experience a problem with your
product, please do not hesitate to contact us. Contact
your sales representative, or in urgent cases, contact
us directly.
Yours sincerely,
STORCH Service Department
Tel.
+49 (0) 2 02 . 49 20 - 112
+49 (0) 2 02 . 49 20 - 244
(only available in Germany)
Table of Contents:
Scope of delivery of your STORCH High Pressure
Water Recovery System 85:
1 x Standard cleaning attachment incl. sealing brus-
hes
1 x High pressure hose 10 m
1 x Suction hose 10 m
1 x Discharge hose 10 m
1 x Suction unit cpl. with filter, immersion pump
and trolley
08 00. 7 86 72 47
08 00. 7 86 72 44
08 00. 7 86 72 43
Page
42
42
42-43
43
43
43
44
44
44
45
45-46
46
46-47
47
48
49
42
Connecting lead with ground fault circuit interrupter
protected plug
Technical specifications suction unit:
- Voltage A/C 230 V, 50Hz
- Current rating 1 Motor 5.5 A
- Current rating 2 Motors 11 A
- Fuse 16 A
- Suction motor output 2 x 1220 Watt
- Airflow max. 5800 L/min
- Length of suction hose max. 30 meters
- Length connecting lead max. 30m,
2.5mm², completely unrolled
- Dimensions of device
L 780mm x W 525mm x H 1310mm
- Weight 45 kg
- Noise level 77 db (A)
Technical specifications immersion pump:
A/C 230 V, 50Hz
Current rating 1.4 A
Power input 320 W
Motor speed 2,800 rpm.
Delivery height 1 / 3 / 5 / 7 m.
Volumes 11 / 9 / 6 / 1 cubic meters/hr.
Standard cleaning attachment:
Overall width 150 mm, Overall length 340 mm,
Working width approx. 110 mm
Working pressure 60-200 bar.
Water infeed max. 20 l/min.
Water
temperature max. 85 °C.
SAFeTY CHeCKS:
eNSuRe COMPLIANCe WITH APPLICABLe NA-
TIONAL LeGISLATION.
General functional description:
The STORCH High Pressure Water Recovery Sys-
tem captures the water blasted onto a facade (or
any other surface, walls, ceilings, floors) by a high
pressure cleaner: the solid particles contained in the
waste water are filtered out as of a particle diameter
of 0.21 mm so that the treated water can typically
(depending on the local waste water authority's re-
gulations) be discharged into a waste water channel
in an environmentally friendly way. The high pressu-
re hose provided with the machine is attached to the
high pressure cleaner and the cleaning attachment
which blasts the water via an internal rotation nozz-
le onto the surface to be cleaned. The suction unit
creates a vacuum in the cleaning attachment so that
the water
Werbung
Kapitel
Inhaltsverzeichnis
