Scope Of Supply; Technical Data; Technical Specifications; Important Safety Instructions - Storch 140 HOT Bedienungsanleitung

1.1 1 Scope of supply

Power HDR140 HOT with tank for cleaning agent, hose drum including a 15 m DN 6 high-pressure hose, cleaning
extension pole, operating manual.

1.2 Technical data

Working pressure
Permissible overpressure
Water volume flow
Max. input water pressure
Heating output
Hot water infeed up to
Fuel tank
Fuel consumption
Cleaning agent tank
Suction height
High pressure hose
Max. hose length
Oil type
Oil volume
Electrical connection value
Output
Weight
Dimensions
Noise level
All information is without guarantee! Subject to technical modifications and errors!

1.3 Important safety instructions

Symbols used to mark instructions
Safety instructions in these operating instruc-
tions which must be observed to prevent risks
to persons are marked with this danger sym-
bol.
Before using the high-pressurecleaner, be
sure to also read the enclosed operating
instructions and keep them within reach
at all times.
For your own safety
The appliance must
– only be used by persons, who have been instructed in
its correct usage and explicitly commissioned with the
task of operating it
– only be operated under supervision
– not be used by children
– not be used by mentally or physically disabled persons
WARNING!
High-pressure water jets can be dangerous if misused. The
jet must not be directed at persons, animals, live electrical
equipment or the cleaner itself. Wear protective clothing,
ear protection and safety goggles.
140 bar
210 bar
10 l / min at 1,450 U / rpm
10 bar
up to 80° C
40°C
17 L
2.7 kg/h
5 L
Not intended
15 FT
30 FT
Rotra Multi THT - SAE 80W-90 API GL-5
0.18 L
230 V / 50 Hz, 16 A
3.4 kW
99 kg
L 607 x W 688 x H 1,071 mm
74 dBA
Do not use the cleaner when other people without protec-
tive clothing are in the working area. Do not direct the jet
towards yourself or towards other persons in order to clean
clothes or footwear. Do not direct the jet towards live ani-
mals.
During operation of the cleaner, recoil forces are produced
at the spraying device and, when the spray lance is held
at an angle, a torque is also created. The spraying device
must therefore be held firmly in both hands.
91
This indicates tips and instructions to simplify
work and to ensure safe operation.
This symbol is used to mark safety instruc-
tions that must be observed to prevent dama-
ge to the machine and its performance.
Original instruction