System Master Sheet; Manufacturer; Purpose; Changes To The Design / Construction - Nussbaum SPRINTER MOBIL 2500 Betriebsanleitung Und Prüfbuch

9

System master sheet

9.1

Manufacturer

Otto Nußbaum GmbH & Co.KG
Korker Straße 24
D-77694 Kehl-Bodersweier
9.2

Purpose

The SPRINTER MOBIL - HYMAX PRO lift is a lifting accessory for the lifting of vehicles up to a total weight
of 2,500 kg or 3,000 kg, in normal workshop operation at a maximum load distribution of 3:2 in or against
the drive-in direction.
Additionally, there is a distinction between cars operated with front or rear drive.
The lift is not set up for standing on the receiving plate or for personnel conveyance.
The lift can be used lexibly. Any solid, even surface can be used as a setup location. However, it can
also be fastened to the loor.
The set up of the standard lift is not permitted in explosion endangered work shops.
After construction and signiicant maintenance changes on load carrying parts the lifting table must be
inspected afterwards by a specialist who approves the changes.
Operation of the lift is done by an operating unit that is located immediately next to the lift.
9.3

Changes to the design / construction

Inspections by a technical expert are required before recommissioning (date, type of change, technical
expert signature).
.................................................................................................................................................................................
......
.................................................................................................................................................................................
......
Name, address of technical expert
.........................................................................................
......
Location, date
9.4

Changing the assembly location

Inspections by a technical expert are required before recommissioning (date, type of change, specialist
signature).
.................................................................................................................................................................................
......
.................................................................................................................................................................................
......
Name, address of technical expert
.........................................................................................
......
Location, date
20110005 OPI 08.12.2015
All manuals and user guides at all-guides.com
SPRINTER MOBIL - HYMAX PRO
..................................................................................
Technical expert signature
..................................................................................
Technical expert signature
19