Disposal And Recycling; Troubleshooting; Possible Cause - Scheppach WSE3200 Original Bedienungsanleitung

13. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be re-
used or recycled. The equipment and its ac-
cessories are made of various types of
material, such as metal and plastic. Defec-
tive components must be disposed of as
special waste. Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc-
es for the environment and human health due to po-
tentially hazardous substances that are often con-
tained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.

14. Troubleshooting

The table below contains a list of error symptoms and explains what you can do to solve the problem if your tool fails to
work properly. If the problem persists after working through the list, please contact your nearest service workshop.
Malfunction

Possible cause

No mains voltage
The machine will
The main fuse has tripped
not switch on
On / off switch defective
Motor defective
Earth clamp not connected to the device
No ignition spark
/ Earth clamp not fitted on the workpiece
Remedy
Check the socket, mains cable, cable, mains plug;
have these repaired by a qualified electrician if nec-
essary.
Check the main fuse
Repair by customer service department
Repair by customer service department
Connect the earth clamp to the welding machine / Fit
the earth clamp on the workpiece
www.scheppach.com
GB | 27