Exercise extreme caution when working on corners, sharp
edges, etc. Prevent your tool attachments from jumping
back from the workpiece and jamming. The rotating tool
attachment tends to jam when working on corners, sharp edges or when it
jumps back from the workpiece . This leads to loss of control or kickback .
Safety instructions for grinding
The safety cover must be attached to the power tool and
adjusted so that maximum safety is guaranteed, that is,
as little of the grinding disc as possible is open toward the
operating individual. The purpose of the safety cover is to shield
the operating individual from broken pieces or accidental contact to the
grinding disc .
Only use disc types that are recommended for your power
tool. Always use the specific guard designed for the
selected disc. Discs for which the power tool was not designed cannot
be adequately guarded and are unsafe .
12 GB