Technical Data; Safety Advice; General Safety Advice; Safety Instructions For Cut-Off Machines - Parkside PWS A1 Bedienungs- Und Sicherheitshinweise

Rotary adjustment knob (vice) x 1
14
Vice adjustment thread (vice) x 1
15
Guide bolt (vice) x 3
16
Stop (vice) x 1
17
Stop (vice rear jaw) x 1
18
Hexagonal socket head screw (fastening of
19
mounting piece) x 2
Base plate x 1
20
Saddle x 1
21
Washer (hexagonal socket head screw
22
saddle) x 2
Hexagonal socket head screw (fastening of
23
saddle) x 2
Mount x 1
24
Clip x 1
25
Rear mounting piece x 1
26
Wing screw x 1
27
Allen key x 1
28
Wrench x 1
29

Technical data

Max. dimensions of the workpiece:
Tubes: round tube: 30 x 2 mm (ø x t)
other shapes: 30 x 2 mm (W x t)
Bars: round bar: ø 12 mm
other shapes: 12 mm (W)
Plates: 45 x 2 mm (W x t)
Material / Weight:
Material: Cast aluminium, cast iron (main
material)
Weight: 2.9 kg (±5%)

Safety advice

Read all the safety ad-
vice and instructions. Failure to observe the
safety advice and instructions could result in elec-
tric shock, fire and/or serious injury.

General safety advice

DANGER OF LOSS OF LIFE
AND ACCIDENT TO IN-
FANTS AND CHILDREN!
Never leave children unsupervised with the
packaging materials. Packaging materials
present a suffocation hazard. Children often
underestimate danger. Always keep the
product out of reach of children. This
product is not a toy.
Keep your working area clean and well lit.
Untidy or poorly lit working areas can lead
to accidents.
Store the product in dust-free and dry conditions.
The angle grinder stand is just a stand of for
the angle grinder. The angle grinder used with
this product should be equipped with the
protection system provided and should com-
ply with the requirement of IEC 62841-3-10.
Safety instructions for
cut-off machines
1) Cut-off machine safety warnings
a) Position yourself and bystanders away from
the plane of the rotating wheel. The guard
helps to protect the operator from broken
wheel fragments and accidental contact with
wheel.
b) Use only bonded reinforced or diamond cut-
off wheels for your power tool. Just because
an accessory can be attached to your power
tool, it does not assure safe operation.
NOTE 1 The wording "bonded reinforced"
or "diamond" is used as applicable depend-
ing on the designation of the tool.
c) The rated speed of the accessory must be at
least equal to the maximum speed marked
on the power tool. Accessories running
faster than their rated speed can break and
fly apart.
d) Wheels must be used only for recommended
applications. For example: do not grind with
the side of a cut-off wheel. Abrasive cut-off
GB/MT 31