Reset All Values With The Calibration Device (Reset) - Balluff BTL7-A501-M J-DEXC-TA12 Serie Betriebsanleitung

BTL7-A/E501-M_ _ _ _-J-DEXC-TA12
Magnetostrictive Linear Position Sensor – Rod Style
10

Reset all values with the calibration device (reset)

NOTICE
Interference in function
Resetting all values while the system is running may
result in malfunctions.
► Stop the system before performing the reset.
The reset function can be used to
restore all the settings to the factory settings. For a reset
the magnet may also be located
outside the measuring range.
Activate reset
Œ Œ ‚ ‚
► Hold down
and simultaneously for at least 4 s.
► Release buttons.
⇒ Reset is activated.
Reset
Œ Œ ‚ ‚
► Hold down
and for at least 4 s.
► Release buttons.
⇒ All values are reset.
⇒ Current position value is displayed.
⇒ Reset is deactivated.
Abort reset
Resetting can be aborted without any changes
being saved after the Activate reset step.
Œ Œ ‚ ‚
► Briefly press
and simultaneously (< 1 s).
► Release buttons.
⇒ Current position value is displayed.
1 = blue button
= gray button
2
www.balluff.com
Type of protection "db" and "t"
1 2
> 4 s
1 2
> 4 s
1 2
< 1 s
Flameproof enclosure
english 25