Resetting Display Functions With A Kiox Display; 25 6.4.2 Resetting Display Functions With A Purion Display - Urban Arrow Family Gebrauchsanweisung

6.4.1 Resetting display functions with a Kiox display

With the Kiox display the trip data (averages and distance) and the
range calculation can be reset.
1. Press the on/off button 82 of the display. The start page will
appear.
2. Press the < button 95 on the operating unit. The status page
will appear.
3. Press the selecting button 94. The menu Settings will appear.
4. Press the + button 97 or – button 93 until My eBike is
selected.
5. Press the selection button 94 to confirm your choice.
6. Select the setting you want to reset using the + button 97 or
– button 93 and press the selection button 94 to confirm your
choice.
7. Press the < button 95 to go back to the previous menu.
Resetting the display to factory setting is done as follows:
2
All user data will be lost when resetting the display to factory
settings.
1. Press the on/off button 82 of the display. The start page will
appear.
2. Press the < button 95 on the operating unit. The status page
will appear.
3. Press the selecting button 94. The menu Settings will appear.
User manual
4. Press the + button 97 or – button 93 until Sys. settings is
selected.
5. Press the selection button 94 to confirm your choice.
6. Select Factory reset using the + button 97 or – button 93 and
press the selection button 94 to confirm your choice.
7. Confirm your choice < > button 9596 and selection button 94.
8. Press the < button 95 to go back to the previous menu.
6.4.2 Resetting display functions with a Purion display
With the Purion display the trip distance and range of the battery
can be reset.
Resetting the value of trip distance to zero is done as follows:
1. Press the - button 102 between 1 and 2.5 seconds until the
desired assistance level TRIP appears on the indicator 105.
2. Press and hold the - button 102 and + button 103
simultaneously over 2.5 seconds. The text 'reset' will initially
appear. The trip distance value is set to zero.
Resetting the range of the battery to zero is done as follows:
1. Press the - button 102 between 1 and 2.5 seconds until the
desired assistance level RANGE appears on the indicator 107.
2. Press and hold the - button 102 and + button 103
simultaneously over 2.5 seconds. The text 'reset' will initially
appear. The range of the battery is set to zero.
EN
43