Switching The E-Bike On And Off - Urban Arrow Family Gebrauchsanweisung

4. Tilt the battery out of the top part of the battery holder 63.
5. Pull the battery out of the bottom part of the battery holder
55.
Tip Mind that the key of the battery lock is also used to
unlock the bike lock. We advise you to never leave it behind in
the battery lock to prevent theft of the e-bike.
Image 20 : Unlocking the e-bike
2
Always take your battery out of the frame when you are
parking it for longer periods or in high risk areas. It is an
expensive part to replace and there is always a chance it will
be stolen.
32 Urban Arrow Family

5.6.3 Switching the e-bike on and off

There are multiple ways to switch on the e-bike:
1. When the display is not yet inserted into the holder (in case of
an Kiox display):
a. Switch on the display and place it into the holder. The
e-bike will automatically switch on.
b. Insert the display into the holder. Switch on the display.
2. When the display is already inserted in the holder:
a. Switch on the e-bike battery (see paragraph 5.6.3).
b. Switch on the display.
2
This is under the condition that a charged e-bike battery
is inserted in the battery cradle and the speed sensor is
properly connected.
2
When the e-bike is switched on correctly the text 'm/h' or
'km/h' will appear on the screen of the Purion display.
There are multiple ways to switch off the e-bike off:
● Switch off the display by pressing the on/off button 57 of the
Purion display or the on/off button 82 of the Kiox display.
● Switch off the e-bike battery (see paragraph 5.6.3).
● Remove the display out of its holder (in case of an Kiox
display) (see paragraph 5.6.1).
2
If no power is drawn from the e-bike for about 10 minutes
(e.g. because the e-bike is not moving) and no button is
pressed on the display for 10 minutes, the e-bike and
therefore also the e-bike battery will shut down automatically
to save energy.