Herunterladen Inhalt Inhalt Diese Seite drucken

Activating Your E-Bike; Inserting, Removing, Securing And Charging The Kiox Display - Urban Arrow Family Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Family:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Checking the carge conditions of the e-bike battery on the Kiox
display is done as follows:
1. Press the on/off button 82 on the Kiox display.
2. Check the battery charge-control indicator 56 on the Kiox
display.
Colour of the
Explanation
indicator
White
The e-bike battery is over 30% charged
Yellow
The e-bike battery is between 15% and 30%
charged
Red
The e-bike battery is between 0% and 15% charged
Red + !
The capacity for assisting the drive has been used
up, and assistance is switched off. The remaining
capacity will be provided for the bike lights and the
on-board computer.
2
If the e-bike battery is being charged on the bike, a
corresponding notification will be displayed.
2
If the display is removed from the holder, the state of charge
that was last displayed for the battery was saved.
28
Urban Arrow Family
5.6

Activating your e-bike

Your e-bike can only be activated (switched on and off) when the
following requirements are met:
● The display is properly inserted in the holder (in case of an
Kiox display)
● A charged e-bike battery is inserted into the battery cradle
● The speed sensor is connected properly
2
There is no specific order in mounting the display and the
battery.
In the following paragraphs we will explain you how to:
● Insert, remove, secure and charge the Kiox display
● Place and remove the e-bike battery from the battery cradle
● Switch the e-bike on and off
2
In case the speed sensor is not connected properly, the text
'Error 503' will appear on the screen of your display. Cycling
remains possible but there will be no pedalling assistance as
the electrical drive unit will be turned off automatically while
functioning in this error mode. Check paragraph 8.2 for more
information on how to check the speed sensor.

5.6.1 Inserting, removing, securing and charging the Kiox display

Inserting the Kiox display is done as follows:
1. Place the lower part of the display into the magnetic holder
47 (see image 16)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Shorty

Inhaltsverzeichnis