Setting And Starting Of A Washing Programme - Pkm WA8-ES1415DI Bedienungsanleitung

D C
RUM LEAN

4.4 Setting and starting of a washing programme

NOTICE! Do not overload the appliance. Always observe the maximum
load for the respective programmes; see chapter 4.2 T
.
PROGRAMMES
After starting a programme, the display of the appliance briefly indicates «
This means: at the beginning of a programme, the appliance detects the weight
of the laundry and adjusts the washing time automatically.
It is also possible that the current running time of the set washing programme is
adjusted automatically (depending on the washing situation, load, additionally
selected functions, etc.) so that it may vary from the specified programme
duration.
H
1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Set the desired programme using the
switched on and in
5. The (10) indicates the duration of the programme (hours : minutes)
DISPLAY
6. Additionally, further functions such as temperature, spin speed, delay, etc. can be
selected by pressing the corresponding buttons; s. chapter 4.4.1 S
THE ADDITIONAL FUNCTIONS
7. Press the « S
TART
8. The door lock will be activated automatically. The operational status indicator of
the door lock goes on: «
9. When the programme is finished, the display indicates the word « END » and an
acoustic signal sounds (if the acoustic signals are activated / see also chapter 4.4.1
S
ELECTION OF THE ADDITIONAL FUNCTIONS
10. The door lock is deactivated automatically. The operational status indicator of
the door lock goes off: «
Depending on model.
35
 Delay end
 Default rinse cycles: 1
 Child safety lock
 Activation / deactivation of the acoustic signals
OW TO SET AND START A WASHING PROGRAMME
STANDBY MODE
.
/ P » -
AUSE BUTTON
».
».
. The washing machine is now
ROTARY KNOB
.
(9) to start the washing programme.
).
~ ~
122
HE WASHING
----
».
.
35
ELECTION OF