4. Operation
4.1 Before the first use
To remove potential residues in the drum of the appliance caused by production,
testing or transportation of the appliance, a complete wash cycle without
laundry (quick washing programme) should always be started before the
first regular wash cycle.
1. Open the water tap.
2. Close the door.
3. Set a quick washing programme (e. g. « Q
appliance is now switched on and in
4. Press the « S
TART
5. The door lock will be activated automatically. The operational status indicator of
the door lock goes on: «
6. When the programme is finished, the display indicates the word « END » and an
acoustic signal sounds (if the acoustic signals are activated / see also chapter 4.4.1
S
ELECTION OF THE ADDITIONAL FUNCTIONS
O
PERATIONAL STATUS INDICATOR
The
CHILD SAFETY LOCK
O
PERATIONAL STATUS INDICATOR
This indicator shows the current programme progress: the
-
is currently running.
PRE
WASH
O
PERATIONAL STATUS INDICATOR
This indicator shows the current programme progress: the
is currently running.
MAIN WASH
O
PERATIONAL STATUS INDICATOR
This indicator shows the current programme progress: the
RINSING CYCLE
O
PERATIONAL STATUS INDICATOR
This indicator shows the current programme progress: the
FINAL SPIN CYCLE
/ P
» -
AUSE
BUTTON
».
is activated.
is currently running.
is currently running.
15` ») using the rotary knob. The
UICK
STANDBY MODE
to start the programme.
).
~
~
108
« C
HILD SAFETY LOCK
« P
-W
»
RE
ASH
« M
»
AIN WASH
« R
»
INSE
« F
»
INAL SPIN
.
»