Setting And Starting Of A Washing Programme - Pkm WA8-1415AI Bedienungsanleitung

5 . Set a washing programme ( e. g. « C
6 . Press the « S
TART
7 . The door lock will be activated automatically. The operational status indicator
« D
OOR LOCK ACTIVATED
8 . When the washing programme is finished, an acoustic signal sounds ( if the
acoustic signal is activated / s. also chapter 5 . 3 . 5 A
9 . The door lock is deactivated automatically after approx. 2 minutes. The
indicator « D
OOR LOCK ACTIVATED
of the washing drum.
1 0 . When the washing programme is finished, always switch off the appliance
completely using the « O
WASHING PROGRAMME
1 1. Close the water tap.

5.2 Setting and starting of a washing programme

NOTICE! Do not overload the appliance. Always observe the maximum
load for the respective programmes; see chapter 4. T
and / or chapter 4.3 T
PROGRAMMES
公 After starting a washing programme, the appliance automatically determines the
weight of the laundry in the washing drum. Depending on this, the water
requirement and the washing time are determined.
It is possible that the current running time of the set washing programme is
adjusted automatically ( depending on the washing situation, load, additionally
selected functions, etc.) so that it may vary from the specified programme
duration.
D
URING PROGRAMME SELECTION
started within 10 minutes, the appliance switches off automatically. All indicators
go off.
H
1 . Load the drum.
/ P » -
AUSE
» goes on.
/ O
N FF
) .
OW TO SET AND START A WASHING PROGRAMME
» ) using the
OTTON
( 7 ) to start the set programme.
BUTTON
» goes off. You can now open the door
» - ( see also chapter 5 . 8 E
BUTTON
HE ADDITIONAL FUNCTIONS
: if no button is pressed or no programme is
~ ~
121
ROTARY KNOB
) .
COUSTIC SIGNAL
HE WASHING
.
( 1 ) .
ND OF A