Before The First Wash Cycle; Programming And Starting Of A Washing Programme - Pkm WA7-E1214 Bedienungsanleitung

Q
UICK
R
S
S
PIN

3.5 Before the first wash cycle

To remove potential residues caused by production, testing or transportation of the
appliance, a quick programme without laundry should be started before the first
regular wash cycle.
1. Open the tap.
2. Close the door.
3. Add some washing detergent (approx. 10 g) into the main chamber
detergent dispenser.
4. Press the O
5. Select the programme . -Q
6. Press the
3.6 P

3.6 Programming and starting of a washing programme

1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Press the O
5. Set the desired programme using the
6. The
7. Additionally to the selected programme, further washing functions such as
temperature, spin speed, delay, etc. can be selected by pressing the
corresponding buttons (s. chapter 3.6.1
FUNCTIONS
8. Press the
9. The door lock will be activated automatically.
13 Depending on model
Downloaded from www.Manualslib.com
 Delay (depending on model)
 Temperature setting (up to 40
/ S
CHNELL
 Spin speed setting (up to 800 rpm max.)
+ S /
INSE PIN
 Delay (depending on model)
S +
PÜLEN
 Spin speed setting (up to 1200 rpm max.)
CHLEUDERN
 Delay (depending on model)
/ S
CHLEUDERN
 Spin speed setting (up to 1200 rpm max.)
/ O -
N FF BUTTON
/ -
START STOP
ROGRAMMING AND STARTING OF A WASHING PROGRAMME
/ O -
N FF BUTTON
(C) indicates the duration of the programme (hours : minutes)
DISPLAY
)
/
START PAUSE
manuals search engine
(1).
- (S ).
UICK CHNELL
(2) to start the washing programme (s. chapter
BUTTON
(1).
ROTARY KNOB
SELECTING OF THE ADDITIONAL
- (2) to start the washing programme.
BUTTON
63
0
C max.)
of the
).
(8).
13
.