Setting And Starting Of A Washing Programme - Pkm WA6-ES1510 Bedienungsanleitung

P
ROGRAMME
D C
RUM LEAN
S 34
MART
(AI)

4.4 Setting and starting of a washing programme

NOTICE! Do not overload the appliance. Always observe the maximum
load for the respective programmes; see chapter 4.2 T
and / or chapter 4.3 T
PROGRAMMES
It is possible that the current running time of the set washing programme is
adjusted automatically (depending on the washing situation, load, additionally
selected functions, etc.) so that it may vary from the specified programme
duration.
D
URING PROGRAMME SELECTION
started within 10 minutes, the appliance switches to O
off.
H
1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
Depending on model.
34
A
VAILABLE ADDITIONAL FUNCTIONS
➢ « W
+ » = main wash cycle: + 10 minutes
ASH
➢ « D
» = delayed programme start
ELAY
➢ Child safety lock
Default rinsing cycles: 1
Max. load: 0.00 kg
Do not use any additional washing agent.
Do not wash any textiles / laundry when using this
programme.
➢ « S
» = selection of the spin speed: up to 1000 rpm max.
PEED
➢ « R
+ » = + 1 additional rinsing cycle
INSE
➢ Reload laundry
➢ Child safety lock
Default rinsing cycles: 2
Max. load: 6.00 kg
OW TO SET AND START A WASHING PROGRAMME
HE ADDITIONAL FUNCTIONS
: if no button is pressed or no programme is
~ ~
121
HE WASHING
.
. All indicators go
FF MODE