Before The First Wash Cycle; Programming And Starting Of A Washing Programme; Selecting Of The Additional Functions - Pkm WA 8.5-E1614 Bedienungsanleitung

3.5 Before the first wash cycle

To remove potential residues caused by production, testing or transportation of the
appliance, a quick programme without laundry should be started before the first
regular wash cycle.
1. Open the tap.
2. Close the door.
3. Add some washing detergent (approx. 10 g) into the main chamber
detergent dispenser.
4. Press the O / O
N
5. Select the programme . -
6. Press the start / stop button (3) to start the washing programme (s. chapter 3.6

Programming and starting of a washing programme).

3.6 Programming and starting of a washing programme
1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Press the O /O
N
5. Set the desired programme using the
6. The indicates the duration of the programme (hours : minutes).
DISPLAY
7. Additionally to the selected programme, further washing functions such as
temperature, spin speed, number of rinsing cycles, delay, etc. can be selected by
pressing the corresponding buttons (s. chapter 3.6.1
ADDITIONAL FUNCTIONS
8. Press the
START
It is possible that the current run time will be adjusted automatically so that it
may vary from the washing time which is shown on the display.

3.6.1 Selecting of the additional functions

Following additional washing functions can be selected:
→ N
UMBER OF RINSING CYCLES
→ S
ELECTION OF THE SPIN SPEED
→ S
ELECTION OF THE TEMPERATURE
→ D
ELAY
→ A
COUSTIC SIGNALS
(2).
FF BUTTON
-.
COTTON
- (2).
FF BUTTON
)
/
PAUSE BUTTON
O / O
N FF
ROTARY KNOB
(3) to start the washing programme.
73
(1).
SELECTING OF THE
of the